• SOLD OUT

Μπαταρία Li-Po 1300mAh 11,1V T-connector

€24.00
Tax included

LiPo Battery Specifications & Usage Guidelines

Our LiPo batteries come in two-cell (7.4V) or three-cell (11.1V) configurations. Their compact size makes them ideal for replicas with limited battery space, providing efficient and long-lasting performance.

Specifications:
📏 Dimensions: 12.5 x 2 x 1.8 cm
🔋 Capacity: 1300 mAh | Voltage: 11.1V
⚡ Max Discharge: 19.5A (Semi-Auto) / 39A (Auto)

⚠ Warning: Stop using immediately if you notice an unusual smell, color change, overheating, deformation, or leakage.

Quantity
block SOLD OUT

Mail to Notify me when available

Proper LiPo Battery Handling

Charging:
✔ Use a microprocessor-controlled charger set to lithium-polymer mode.
✔ Always charge with a balancer (service plug) to ensure even cell charging.
✔ Never leave the battery unattended while charging. Use a fireproof charging bag.
✔ Do not overcharge beyond 4.2V per cell.

Usage:
✔ Avoid discharging below 3.2V per cell to prevent permanent damage and potential ignition.
✔ Do not exceed the discharge current limit (Capacity in mAh × C-rating). Example: A 2100mAh battery with a 15C rating (2100mAh × 15 = 31.5A) must not exceed 31.5A.
✔ Keep away from flammable objects.
✔ Do not puncture, short-circuit, or damage the wiring.

Storage:
✔ Never store the battery connected to a replica.
✔ For long-term storage, check the charge periodically using a dedicated charger or alarm.
✔ Store at approximately 70% charge.
✔ Keep away from direct sunlight. Ideal storage temperature: 12°C.

⚠ Note: Damage caused by improper handling is not covered by the seller. LiPo batteries are consumable items and naturally degrade over time. Wear and tear do not constitute a product defect.

Specific References

Comments (0)

3 other products in the category